| Resistance of Various Steels to Perforation by Fragment Simulating Projectiles |
15 SEP 1985 |
38 pages |
| Authors:
J. F. Sullivan; WATERTOWN ARSENAL LABS MA
|
 | In response to requests of the Office, Chief of Ordnance, and in cooperation with various steel producers, tests have been conducted over a period of several methods, on various steels in varying conditions of treatment. While the results of these tests have been reported, as they have been completed in Watertown Arsenal reports, an attempt is made in this report to collate and integrate the results of the several tests. ... |
|
| High Impact Strength Steels for Low Temperature Service, |
19 AUG 1985 |
|
| Authors:
A. Hurlich; WATERTOWN ARSENAL LABS MA
|
 | To meet varied demands successfully, ordnance steels must possess high strength, the ability to withstand shock loading at reduced temperatures, and the ability to undergo some plastic deformation without initiation or propagation of brittle fracture. The latter characteristics may be lumped together under the general term toughness. It has been long recognized that steels having tempered martensitic microstructures have mechanical properties superior to those of steels having other microstructures. At ... |
|
| Welding of Titanium Alloy Plate. |
APR 1982 |
|
| Authors:
John J. Burke; WATERTOWN ARSENAL LABS MA
|
|
| Titanium Alloy for T-109 Medium Tank Track Development of Processing Procedures and Manufacturing Techniques. |
JUL 1981 |
|
| Authors:
Ernest N. Kinas; WATERTOWN ARSENAL LABS MA
|
|
| Report on Redesign of XM-63 E1 Gun. |
03 MAR 1981 |
|
| Authors:
WATERTOWN ARSENAL LABS MA
|
|
| Short Time Elevated Temperature Strength Characteristics of High-Strength Gun Steels and a Hot Work Die Steel. |
1965 |
|
| Authors:
WATERTOWN ARSENAL LABS MA
|
|
| Transitional Behavior of High-Strength Steel Pressure Vessels. |
MAY 1963 |
|
| Authors:
John M. Ingraham; WATERTOWN ARSENAL LABS MA
|
|
| Evaluation of Co-Reduced Depleted Uranium Alloy. |
MAR 1963 |
|
| Authors:
E. N. Kinas; F. J. Rizzitano; WATERTOWN ARSENAL LABS MA
|
|
| Austenitic Decomposition in Welding Steel. |
MAR 1963 |
|
| Authors:
Mark M. D'Andrea Jr; WATERTOWN ARSENAL LABS MA
|
|
| Graphical Presentation of Mechanical Test Data (Obtained at Watertown Arsenal Laboratories between 1 January and 30 June 1962). |
MAR 1963 |
|
| Authors:
Charles H. Curll; WATERTOWN ARSENAL LABS MA
|
|
| Aging Response of 18% NI-CO-MO Steel. |
FEB 1963 |
|
| Authors:
S. V. Arnold; WATERTOWN ARSENAL LABS MA
|
|
| An Instrument for Measuring Surface Profiles of Fractured Metallic Specimens. |
FEB 1963 |
|
| Authors:
James W. Waters; WATERTOWN ARSENAL LABS MA
|
|
| Magnetic Field Effects during Austenite-to-Martensite Transformation of AM355 Steel. |
JAN 1963 |
|
| Authors:
Albert A. Anctil; WATERTOWN ARSENAL LABS MA
|
|
| Fracture Surface Configurations of AISI 4340 Steel as Affected by Temperature and Geometry. |
JAN 1963 |
|
| Authors:
Frank L. Carr; Frank R. Larson; WATERTOWN ARSENAL LABS MA
|
|
| Frequency Bandwidth Considerations in Ultrasonic Testing. |
JAN 1963 |
|
| Authors:
Charles P. Merhib; WATERTOWN ARSENAL LABS MA
|
|
| Ultrasonic Pole Patterns in SAE 4150 Steel. |
JAN 1963 |
|
| Authors:
Paul F. Sullivan; WATERTOWN ARSENAL LABS MA
|
|
| Transverse Rupture Strength of Alumina Fiber-Ceramic Composites. |
NOV 1962 |
|
| Authors:
Morton I. Kliman; WATERTOWN ARSENAL LABS MA
|
|
| Formation of Alumina Whiskers. |
NOV 1962 |
|
| Authors:
Morton I. Kliman; WATERTOWN ARSENAL LABS MA
|
|
| Impact Strength of Alumina Fiber-Ceramic Composites. |
NOV 1962 |
|
| Authors:
Morton I. Kliman; WATERTOWN ARSENAL LABS MA
|
|
| Formation and Properties of Alumina Fiber. |
NOV 1962 |
|
| Authors:
Morton I. Kliman; WATERTOWN ARSENAL LABS MA
|
| The production of high strength aluminum oxide fiber has been achieved by means of plastic extrusion and solid state sintering of selected alumina powders at elevated temperatures. The processing variables for producing fibers possessing transverse rupture strengths of 100,000 psi are presented. The variation of elastic modulus and transverse rupture strength with temperature for alumina fiber is reported for temperatures up to 1300 C. (Author). |
|
| A Study of Cylindrical Impact Specimens. |
NOV 1962 |
|
| Authors:
Norbert H. Fahey; WATERTOWN ARSENAL LABS MA
|
|
| Conception and Installation of an Electrical High Energy Discharge Unit. |
OCT 1962 |
|
| Authors:
Martin Kessler; WATERTOWN ARSENAL LABS MA
|
|
| Evaluation of Bassett Heat Treatment Process. |
OCT 1962 |
|
| Authors:
Eric B. Kula; Albert A. Anctil; WATERTOWN ARSENAL LABS MA
|
|
| Effect of Billet History on Hot Extruded Properties of 1020, 4330 and SI-Modified 4340 Steel. |
SEP 1962 |
|
| Authors:
Roger A. Gagne; WATERTOWN ARSENAL LABS MA
|
|
| Mass Effect on Tensile Properties of High Strength Steel Castings. |
SEP 1962 |
|
| Authors:
Paul J. Ahearn; WATERTOWN ARSENAL LABS MA
|
|
| Graphical Presentation of Mechanical Test Data (Obtained at Watertown Arsenal Laboratories between 1 January and 30 June 1961). |
SEP 1962 |
|
| Authors:
Charles H. Curll; WATERTOWN ARSENAL LABS MA
|
|
| Graphical Presentation of Mechanical Test Data (Obtained at Watertown Arsenal Laboratories between 1 July and 31 December 1961). |
SEP 1962 |
|
| Authors:
Charles H. Curll; WATERTOWN ARSENAL LABS MA
|
|
| Effect of Solidification Variables on Mechanical Properties of Cast Steel. |
JUL 1962 |
|
| Authors:
David A. Colling; Paul J. Ahearn; WATERTOWN ARSENAL LABS MA
|
|
| Point-Contact Transducers for Ultrasonic Testing. |
JUN 1962 |
|
| Authors:
Otto R. Gericke; WATERTOWN ARSENAL LABS MA
|
| The feasibility of employing point-shaped ultrasonic transducers which directly amplify the detected ultrasonic signal was investigated. Two approaches were considered, one used a semiconductor point with a depletion layer at the very tip produced by a bias voltage, the other employed the variation of contact resistance with contact pressure. The latter method was explored experimentally and found suitable for the detection of ultrasonic energy. In addition, experiments are described in ... |
|
| Oriented Single Crystals of Aluminum for X-Ray Analysis. |
JUN 1962 |
|
| Authors:
Joseph M. Dhosi; Charles P. Gazzara; Raymond M. Middleton; WATERTOWN ARSENAL LABS MA
|
|
| Charpy Impact Maximum Loads Studies. |
JUN 1962 |
|
| Authors:
Charles H. Curll; WATERTOWN ARSENAL LABS MA
|
|
| Evaluation of Steel Plates for the Ship Structure Committee. |
MAY 1962 |
|
| Authors:
Frank L. Carr; Thomas S. DeSisto; WATERTOWN ARSENAL LABS MA
|
|
| Graphical Presentation of Mechanical Test Data (Obtained at Watertown Arsenal Laboratories between 1 August and 31 December 1960). |
MAY 1962 |
|
| Authors:
Charles H. Curll; WATERTOWN ARSENAL LABS MA
|
|
| Graphical Presentation of Mechanical Test Data (Obtained at Watertown Arsenal Laboratories between 1 January and 31 July 1960). |
APR 1962 |
|
| Authors:
Charles H. Curll; WATERTOWN ARSENAL LABS MA
|
|
| Mechanical Properties of Titanium and Aluminum Alloys at Cryogenic Temperatures. |
MAR 1962 |
45 pages |
| Authors:
Charles F. Hickey Jr; WATERTOWN ARSENAL LABS MA
|
|
| Effects of Variables in Charpy Impact Testing. |
MAR 1962 |
|
| Authors:
Norbert H. Fahey; WATERTOWN ARSENAL LABS MA
|
|
| Fabrication and Utilization of Plastic Tools as Manufacturing Aids. |
MAR 1962 |
|
| Authors:
Arthur M. Ayvazian; Charles R. Hyland; WATERTOWN ARSENAL LABS MA
|
| An investigation was conducted to develop more proficiency in the fabrication of plastic tooling as a manufacturing aid in the production of Ordnance components. A limited study of the cementing and reinforcing characteristics of epoxy resins is presented. Four current production machining applications were selected and techniques for fabricating plastic tools were developed. The plastic tooling applications were evaluated. (Author-PL). |
|
| Radiography of Uranium. |
MAR 1962 |
|
| Authors:
Satrak Der Boghosian; Charles E. Dixon; WATERTOWN ARSENAL LABS MA
|
|
| Considerations in the Kinetics of Phosphorus and Sulfur Removal from Basic Electric-Arc Furnace Steels. |
MAR 1962 |
|
| Authors:
Eugene DeLuca; John Zotos; WATERTOWN ARSENAL LABS MA
|
|
| Charpy Impact Tests of 4340 Steel and 6Al-6V-2Sn Titanium Alloy, Using Standard and Thin Charpy Specimens. |
JAN 1962 |
|
| Authors:
Armando A. Iannelli; F. J. Rizzitano; WATERTOWN ARSENAL LABS MA
|
|
| Hot Rolling of Commercially Pure Titanium and Titanium Alloy Ti-6Al-4V. |
DEC 1961 |
59 pages |
| Authors:
Eugene DiCesare; WATERTOWN ARSENAL LABS MA
|
|
| Air Contamination of Titanium Weld-HAZ Surfaces. |
DEC 1961 |
|
| Authors:
Sheldon S. White; Mark M. D'Andrea Jr.; Carl E. Hartbower; WATERTOWN ARSENAL LABS MA
|
|
| Fracture Toughness of AISI 4340 Steel as a Function of Prior Austenite Grain Size. |
DEC 1961 |
|
| Authors:
Robert N. Katz; WATERTOWN ARSENAL LABS MA
|
|
| Low Temperature Mechanical Properties of 300 Series Stainless Steels and Titanium. |
DEC 1961 |
39 pages |
| Authors:
Thomas S. DeSisto; Frank L. Carr; WATERTOWN ARSENAL LABS MA
|
|
| Observation of an Austenite-to-Martensite Transformation in 'Spines' Along Prior Austenite Grain Boundaries in Fully Hardened AISI 4340 Steel. |
DEC 1961 |
|
| Authors:
Robert N. Katz; WATERTOWN ARSENAL LABS MA
|
|
| Welding Low-Carbon Martensite. |
DEC 1961 |
|
| Authors:
William P. Hatch; Roger E. Travis; Carl E. Hartbower; WATERTOWN ARSENAL LABS MA
|
|
| Development of Radiographic Techniques for the Inspection of Uranium Tubular Shapes. |
DEC 1961 |
|
| Authors:
Satrak Der Boghosian; Ernest H. Rodgers; WATERTOWN ARSENAL LABS MA
|
|
| The Feasibility of Using Neutron Radiography as a Nondestructive Testing Technique. |
DEC 1961 |
|
| Authors:
Arnold W. Schultz; William Z. Leavitt; WATERTOWN ARSENAL LABS MA
|
|
| A Primary Ultrasonic Standard. |
DEC 1961 |
|
| Authors:
Satrak der Boghosian; John W. Orner; WATERTOWN ARSENAL LABS MA
|
|
| Ultrasonic Attenuation and Velocity in SAE 4150 Steel. |
DEC 1961 |
|
| Authors:
emmanuel p. papadakis; Paul F. Sullivan; Donald J. Waltman; WATERTOWN ARSENAL LABS MA
|
|
Reports by Corporate Author
