Particulate/matrix interface strength is an important parameter in relation to the mechanical behaviour of particulate reinforced metal composites. the present work investigates the degree of interface bonding in commercial al6061-al2o3 particulate composites using a critical stress partition model. this model correlates the composite tensile properties with the strengths of particulate, matrix and interface, and also with some fracture parameters. based on the results on tensile testing, micro-indentation and quantitative fracture ...
This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, data, dr mmc, experimental, mmc, mmc data, theoretical, materials and material types:, (sic)p/al, al matrix, al2o3 coatings, coatings, particulates, sic particulates, sic/al material characteristics and data fields:, fracture data, fracture strain data, fracture surface data, fractures, interfacial decohesions, interfacial strength, microhardness, plastic deformations, plastic strains, strain hardening rates, stress-strain data, tensile ...
This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, data, dr mmc, experimental, mmc, mmc data materials and material types:, (sic)p/a356, (sic)p/al, a356 matrix, al matrix, particulates, sic/a356, sic/al material characteristics and data fields:, flow stress, fracture toughness data, fracture toughness parameters, frequency data, optical microstructures, tensile strength data, volume fraction data, young's modulus parameter values relevant to the data:, ...
This paper concerned mmc in some important way and contained information about, utilized, or discussed these subjects: basic topics:, cmc, composite materials, dr mmc, experimental, mmc materials and material types:, (sic)p/al, (sic)p/al2o3, (sic)p/mgo, al matrix, al2o3 matrix, coatings, mgo matrix, particulate coatings, particulates, precursors, sic particulates, sic/al, sic/al2o3, sic/mgo, substrates material characteristics and data fields:, interfacial properties, interfacial strengths, particulate sizes, porosity, wettability parameter values relevant to the data:, 0 ...
Based on studies of austenite deformation behavior and continuous-cooling-transformation behavior of a Ti-V microalloyed steel by cam plastometer and quench-deformation dilatometer, respectively, plate rolling schedules were designed to produce recrystallized austenite, unrecrystallized austenite, and deformed ferrite + unrecrystallized austenite. The effects of austenite condition and cooling rate on the final microstructure and mechanical properties were investigated. To rationalize the variation in final ferrite grain size with different thermomechanical processing schedules, ...
Materials Sciences For The Future, Proc. Int. Sampe Symp. Exhib., 31st 1986 977-86, 1986. ( Edited By J. L. Bauer And R. Dunaetz; Sampe: Covina, California ) ( Ad-D440 252 )
Reports by Author
